PRODUCT / 03 / 预装式变电站
Prefabricated Substation
Compact factory-assembled substation integrating the high voltage compartment, transformer compartment and low voltage compartment in one enclosure, verified to IP44 and IK10.
Standards referenced for project review, not evidence of product certification:
- IEC 62271-202
- Structure
- Three-compartment integrated (HV / transformer / LV)
- Type tests
- Insulation, grounding and temperature-rise tests qualified
- Noise level
- ≤ 45 dB(A) (measured 37 dB(A))
- Configurable
- Rated voltage, transformer capacity, switchgear configuration, enclosure dimensions and protection scheme engineered per project
- Enclosure protection
- IP44
- Mechanical impact resistance
- IK10
工程视图
三舱式变电站
已发布源数据的可视化摘要。它不能替代完整技术参数表或项目确认。
- 外壳防护
- IP44
- 机械冲击
- IK10
- 配置
- 项目定制
Product description
Compact factory-assembled substation integrating the high voltage compartment, transformer compartment and low voltage compartment in one enclosure, verified to IP44 and IK10.
Features
- Three-compartment integrated structure
- Compact footprint and convenient transportation
- Factory prefabrication for faster on-site installation
- Suitable for industrial, commercial and infrastructure distribution systems
- Enclosure protection verified to IP44
- Mechanical impact resistance verified to IK10
Test values stated in the product flyer
- Measured noise
- 37 dB(A)
- Enclosure protection
- IP44
- Noise level (requirement)
- ≤ 45 dB(A)
- Mechanical impact resistance
- IK10
- Enclosure mechanical strength
- 2500 N/m² minimum; measured 2600 N/m²
- Insulation / grounding / temperature-rise tests
- Qualified
Technical parameters
| Parameter | Value |
|---|---|
| Structure | Three-compartment integrated (HV / transformer / LV) |
| Type tests | Insulation, grounding and temperature-rise tests qualified |
| Noise level | ≤ 45 dB(A) (measured 37 dB(A)) |
| Configurable | Rated voltage, transformer capacity, switchgear configuration, enclosure dimensions and protection scheme engineered per project |
| Enclosure protection | IP44 |
| Mechanical impact resistance | IK10 |
| Enclosure mechanical strength | ≥ 2500 N/m² (measured 2600 N/m²) |
Parameters are taken from the manufacturer product sheet. Final ratings are confirmed against the project specification before order.
已记录的应用场景
这些链接展示了当前与该产品关联的证据基础。它们是工程审查的起点，不是项目参考或推荐。
Frequently asked questions
What is integrated in the substation?
The platform combines high-voltage, transformer and low-voltage compartments in one factory-assembled enclosure.
Which verified enclosure data is available?
The supplied flyer states IP44 enclosure protection and IK10 mechanical impact resistance. It also reports 37 dB(A) measured noise and 2600 N/m² measured enclosure mechanical strength.
Are voltage and transformer capacity fixed?
No. Rated voltage, transformer capacity, dimensions, protection scheme and final configuration are project-specific and confirmed during engineering.
Which standards apply?
Review IEC 62271-202 as applicable references. The exact standard scope and supporting test evidence must be confirmed for the quoted configuration.
下一步
Specify the equipment.
电压等级、额定电流、短路水平、安装环境以及项目招标所依据的标准。